Screen goes blank after a few seconds

Arjan

The screen is blank after a few seconds.
For only a few seconds after boot I can see the project, the matrix seems functional even when the screen is blank.

How to reproduce

System info (if relevant)

Rlx version: 1.1.6
Connected devices: all disconnected
DAW or software used: standalone

Screenshots or videos (if applicable)

https://youtu.be/HjvaZXUk4G8

Include links or uploads if visual context would help us understand the issue.

Kyriakos-Reliq

Hi @Arjan,

Thanks for reporting this and for sharing the video.

This looks like it may be related to the display calibration setting. Could you try changing the display calibration mode?

To access Display Calibration:

Go to the Settings page
Press and hold FX + SELECT
While holding them, the first 3 grid pads will show the available display calibration options
Try the different options and see if one of them resolves the blank screen behavior

The display will briefly power cycle when selecting a mode, which is expected.

You can also find the details in the manual here

I hope this helps but please let us know how it goes, and if the issue persists after trying the calibration options we’ll take the next step from there.

Arjan

Tried all three modes but no effect.
And I also didn't observe any power cycle when selecting a mode.

20260518-122043.mp4

51MB

Kyriakos-Reliq

Hi @Arjan ,
Thanks a lot for trying this and for sending the video.
From what you describe, it does sound like the calibration mode is not actually taking effect. One thing worth trying is booting into recovery mode by pressing and holding SHIFT while powering on Reliq.

That said, It might be best to move this to email so we can look into your specific case in more detail. Could you send us a message at support@reliq-instruments.com with the video and a short description of what you tried?

We’ll take it from there and help get this sorted.