What’s the issue?
Audio routed in the Matrix with Mixer volume at full was not passing audio. After re-routing and un-routing audio I somehow got audio to pass even though the UI showed no audio routing. I was only able to un-route audio by un-routing CV mapping in a different Group (blue vs red).
How to reproduce
I don't know how well you will be able to reproduce this but here it goes...
- Create audio routing in matrix (Warp L and R on ch 4/5 directly to Warp L and R. The outs of 4/5 go directly to the rack's output jacks. )
- Create CV routing in matrix (not grouped, 15 and 16)
- Create MIDI sequence
- Play sequence
Expected behavior:
Audio plays through output to which the audio signal is routed and CV to CV
And the Reliq screen indicates what is routed to what
Actual behavior:
No audio initially
Finally got audio after randomly routing and un-assigning matrix routings
With no audio routed in UI, audio was still passing from 4/5 (grouped and named Warp L and R in video)
Audio cuts out when un-assigning the CV routing
I'm not sure how easy it will be to replicate this. I can only say that this is a new preset that I was running tests on over the course of at least an hour, never saving the preset. Maybe I reached a maximum number of unsaved states? Just a guess.
System info (if relevant)
- Rlx version: Rlx 1.2.0
- Connected devices: breakout, Neuzeit Warp, Intellijel Stereo Out
Screenshots or videos (if applicable)
https://www.dropbox.com/scl/fi/l1m7k66kxqyuix0kdtsxz/Video-Oct-04-2025-8-09-09-PM.mov?rlkey=de2v9nolikshtmzs6vc2l3n5a&st=gaj22nrd&dl=0
At the end of the video I re-route the Warp on 4/5 ins back to 4/5 outs, which should pass dry audio, but as you can hear. there is no audio.
